Tone Value

Correct measurement data to a specific set of curves

File Processing Options

ColorAnt’s Tone value tool can optimize measurement data according to either a desired tone value increase property or gray balance property. Data will be corrected with a “what if” the data was printed to (e.g. G7) specific conditions.

Even when every precaution is taken to insure accuracy of the CtP curves and on press, there will always be deviations caused by production and environmental factors. An additional example would be Flexographic printing and defining the exact percentage of the first printed dot or the shape of the highlight bump.

With ColorAnt’s Tone Value tool, there are three different ways to ensure tone value correction is incorporated properly into measurement data.

  • ColorAnt’s first option, Correction according to a given profile, specify a standard profile and the tone value curves from this profile. The measured values are adjusted to achieve exactly the same tone value increase curves as those achieved with the standard profile that was specified.
    Note: Depending on the loaded measurement data only ICC profiles fitting the color space are shown (e.g. CMYK or multicolor. In this example a 7 inks multicolor profile is selected).
ca21_tviprofile-400x101

Correction according to a profile

 

Correction according to G7 Gray Balance, the tone value curves are calculated to match the gray balance requirements of the G7 calibration process.

ca21-tvig7

Correct Measurement data to G7 standards

Note: G7 is defined to work with CMYK only. However it is possible to apply the G7 process on the CMYK parts of a multicolor measurement file. The additional (multicolor) channels will not be effected. The G7 calibration process ensures that the CMY curves reach a neutral gray of defined lightness values throughout the entire gray balance curve.

G7 + ISO 20654: G7 is defined to work with CMYK only. However it is possible to apply the G7 process on the CMYK parts of a multicolor measurement file and the additional (multicolor) channels will be corrected according to ISO 20654.

The third option Correction according to TVI targets allows for detailed manual editing of each channel allowing the user to predefine the tone value increases that should be incorporated in the measurement data. This feature works for CMYK and multicolor color spaces. Depending on the data that was loaded into ColorAnt, additional or fewer channels are displayed as can be seen in the screenshot showing a CMYK file on the left and a 7 ink file on the right. More details can be found here.

ca21_tvieditcmky-mc-400x298

Correct data to TVI targets

 

Custom Tone Value – Corrections

ColorAnt’s Custom Tone Value options is specifically for manual corrections like smoothing, adding or deleting points and modifying single TVI values. In addition, save custom curves and apply them on other channels and data.

Procedure:

  1. Click on the Smooth button to smooth the curve. Only a few fulcrums are displayed after smoothing; ColorAnt is not deleting any original fulcrums but helps to better optimize the data by reducing the amount of values. Apply the corrections on the measurement data and all fulcrums will be adjusted to fit the smoothed curve.

2. In order to add any number of additional ink values, click on the Add button. Navigate to the new empt entry that will appear in the table and type in the desired Ink Value and the Increase value in dot percentage required. Apply the changes by hitting the tabulator or enter key on the keyboard. The curve will be immediately updated.

Note: The original curve will be displayed in gray for as a reference.

3. Change any of the existing Increase values in the table by simply selecting an entry and changing the numbers.

4. To delete an Ink Value, select the desired entry in the table and click Delete.

5. Save the curve for later use. Click on Save as and enter a name for the curve in the appearing dialog.

6. To apply the manual editing, click on OK and return to the Tone Value dialog. The edited curve will be marked as Customize.